Industrial Hoses
AQUAFORZA 10
Water Suction & Discharge Hose
APPLICATION :
Water suction and discharge in industrial and construction services
TEMPERATURE :
-13˚F to +158˚F (-25˚C to +70˚C)
REINFORCEMENT :
High tensile synthetic textile and steel helix wire
COVER :
Abrasion and weather resistant synthetic rubber
TUBE :
Natural and Synthetic rubber
From 1” to 12"
ARIAFORZA 20
Air Hose
APPLICATION :
Medium-heavy duty service for air and pneumatic tools specially in
mines, quarries and constructions
TEMPERATURE :
-13˚F to +158˚F (-25˚C to +70˚C)
REINFORCEMENT :
High tensile synthetic textile
COVER :
Abrasion, ozone and weather resistant smooth natural and synthetic rubber
TUBE :
Oil-mist resistant natural and synthetic rubber
From 1/4” to 4"
OLIOFORZA 10
Oil Suction & Discharge Hose
APPLICATION :
For delivery of petroleum products with aromatic content up to 50%
TEMPERATURE :
-31˚F to +158˚F (-35˚C to +70˚C)
REINFORCEMENT :
High tensile synthetic textile and anti-static copper wire
COVER :
Abrasion, ozone, weather and oil resistant special synthetic rubber
TUBE :
Oil and petrol resistant, black NBR
From 1” to 4"
PrimaCor
PVC Lay Flat Hose
APPLICATION :
Irrigation, construction, industrial, agricultural, mining, portable hydrant, relay supply line, quarry
TEMPERATURE :
-5˚F to +170˚F (-20˚C to +76˚C)
CONSTRUCTION :
Medium: Features a balanced polyester yarn spiral wrap, longitudinal strength member and homogeneous PVC tube and cover to prevent separation.
Heavy: Premium quality PVC tube and cover, reinforced with two spiral plies and longitudinal synthetic cords.
FEATURES :
Medium: Smooth tube to provide low friction loss, with Ultraviolet inhibitors to reduce aging.
Heavy: MSHA accepted – use as a water hose in underground mining applications.
Provides higher working pressure and resist kinking and twisting.
From 3” to 12"
PrimeFlex
PVC Suction Hose
APPLICATION :
Suction and delivery of water, salt water, light chemicals, liquids etc. in agricultural, industrial applications , constructions, sewer purging, sludge, slurries, waste matter, sand and gravel, etc.
TEMPERATURE :
-40˚F to +122˚F (-40˚C to +50˚C)
CONSTRUCTION :
Strong, flexible and smooth special superelastic material, shock resistant PVC spiral, crushing, chemical agents, abrasion and weather resistant, corrugated sliding outside
From 1” to 6"
Primo
PVC Garden Hose
APPLICATION :
Irrigation and washing in parks, car spray washing, factories, gardening
TEMPERATURE :
+20˚F to +150˚F (-6˚C to +66˚C)
CONSTRUCTION :
Outside and inside layers are made of PVC and the middle reinforcement layer is high tensile and long lasting synthetic fiber or polyurethane
FEATURES :
Flexible, elastic, durable, light weight with excellent adaptability. Excellent weather resistance and high pressure tolerance.
From 1/2” to 1"
Primo
PVC Steel Wire Hose
APPLICATION :
Suction and discharge of water, oil and powder in the factories, agriculture, engineering, foodstuffs
TEMPERATURE :
+15˚F to +160˚F (-9˚C to +71˚C)
CONSTRUCTION :
Tube and cover – PVC
REINFORCEMENT :
Steel helical wire
FEATURES :
Good adaptability to hard weather conditions and vacuum pressure. Light transparent with small bending radius
From 1/2” to 6"
Primo
PVC Reinforced Hose
APPLICATION :
Conveying water, oil, gas under normal working conditions in the factory, farm, ship, building and family
TEMPERATURE :
+15˚F to +150˚F (-9˚C to +65˚C)
CONSTRUCTION :
Tube and cover – PVC
REINFORCEMENT :
High tensile polyester fiber braiding
FEATURES :
Flexible, transparent, durable, non-toxic, odorless and anti-erosion. Adaptable to high pressure condition
From 1/4” to 2"
Primo
PVC Clear Hose
APPLICATION :
Pharmaceutical, medical, refrigeration, water and fluid lines, air and gas lines, pump feed and discharge.
TEMPERATURE :
-41˚F to +175˚F (-40˚C to +80˚C)
CONSTRUCTION :
Tube – Polyvinyl Chloride (PVC)
Hardness – Durometer 83 ± 3 Shore A
FEATURES : Light weight yet tough and abrasion resistant. As flexible as rubber and made from non-toxic material
From 3/16” to 1"
Primo
Nylon Hose
APPLICATION :
Transport pressurized air to pneumatic actuators, tools and other devices
TEMPERATURE :
-60˚F to +200˚F (-51˚C to +93˚C)
CONSTRUCTION :
Tube – Nylon 12
Hardness – Shore D 70
FEATURES :
High working pressure and temperature/chemical resistance.
Very low moisture absorption rate
From
4 mm to 12mm
3/8" to 1/2"
Primo
PU Hose
APPLICATION :
Transport pressurized air to pneumatic actuators, tools and other devices
TEMPERATURE :
-41˚F to +175˚F (-40˚C to +80˚C)
CONSTRUCTION :
Tube – Polyurethane (PU)
Hardness – Shore A 98
FEATURES :
Strong, flexible and kink resistant. UV Stabilized tubing is excellent for outdoor use.
From
4 mm to 12mm
3/8" to 1/2"
Primo
PU Coiled Hose
APPLICATION :
Pharmaceutical, medical, refrigeration, water and fluid lines, air and gas lines.
Pump feed and discharge
TEMPERATURE :
-41˚F to +175˚F (-40˚C to +80˚C)
CONSTRUCTION :
Tube – Polyvinyl Chloride
Hardness – Durometer 83 ± 3 Shore A
FEATURES :
Light weight yet tough and abrasion resistant. As flexible as rubber and made from non-toxic material
From
8 mm to 12 mm
Hose Inner Diameter (ID)
Measured in 16/1 inch increments identified by use of a “dash”(-) numbering system. i.e., = "4/1 = "16/4
4-.
Hose Outer Diameter (OD)
A critical measurement when considering hose clamps and applications where envelope size is
limited.
Reinforcement
Outer Diameter
The reinforcement material is the
“Muscle/Strength” to resist internal or
external pressures. The three basic
types of reinforcement are Spiral,
Braid and Helical.
Hose Working Pressure
Should have a working pressure rating
meeting or exceeding the maximum
operating pressure of the system.
Hose Burst Pressure
The Burst Pressure for a hydraulic
hose is that the maximum pressure
before a particular hose will generally
explode or have a rupture in it.
Wall Thickness
Measured in millimeters (mm)
Bending Radius
Is the smallest arc that the hose can be
bent before its life is greatly reduced.
Exceeding the bend radius can cause
kinking, inner tube washout and
excessive stress on reinforcement
Vacuum Rating
Measured in PSI and Bar
1 Bar=14.5PSI
Theoretical Weight
Provided by the foot for instances
where it is a critical parameter in the
design of the system.